New Product Release
05/02/07
New Point Style - Headless Flat 20 in BeCu for .075" Centers
(075-25) and .050" Centers (X Probe X50-25)
075-2520
(.075 Center) and X50-2520 (.050 Center)
headless flat point style in BeCu.
This point style was developed for
use with Agilents Bead Probe
Technology when components are near
the solder bead. Our standard
headed flat point style (10) can
also be used where a larger probe
area is desired to contact the
solder bead.
04/12/07
Elevated Y 8.0 oz [227] spring force available in our 050-T25
and X39-25 Series. This new spring
force was designed to provide higher spring forces to penetrate through todays
no-clean, OSP and lead-free processes and environments.
New Elevated Y
Spring Force available in our 050-T25 (.050
Center, .250 Stroke) Series and X39-25
(.039 Center, .250 Stroke) Series
Probes
Series
Letter Pre-load @ 2/3 Stroke Material Fatigue Life (Cycles
@ Stroke)050-T25 Y 3.2
[91] 8.0 [227] Stainless Steel 25K min @ .167 [4.24] max X39-25
Y 3.2
[91] 8.0 [227] Stainless Steel 25K min @ .167 [4.24] max
Please visit our website www.qatech.com
for all specifications and dimensions. Pricing will be the same as
our standard 050-T25 or X39-25 series probes. For samples, please contact QA
Technology Sales Department at (603) 926-0348 or sales@qatech.com
03/09/07
QA is pleased to
offer the ability to strip the Kynar insulation on the exposed end of the wire
when crimped onto a wire jack. These wires can now be cut
to length and be stripped up to .669 [16.99] to aid in the wire wrapping
process. The price for this option will be a $.01 adder to the standard
WJ wire attached pricing. This option is designated with a -S at the end
of the WJ part number (i.e. WJ30C3630-S .669)
Please visit www.qatech.com
for
drawings.
02/13/07
QA Technology is pleased to add
our "91-S" steel blade point style to our High Pre-load "E" spring
product offering. In today's test environments, the challenge is greater
than ever to penetrate excessive fluxes and contaminants in Pb-free, OSP and
No-clean processes. These new 8 ounce rated springs were designed to
offer a higher force during the first 2/3rd of actuation resulting in better
probe tip penetration and higher first-pass yields. The force is also more
consistent when the probe travel is affected by variations due to board flux,
fixture tolerances and target heights.
Please visit www.qatech.com
for all specifications, dimensions and samples.
10/15/06
QA Technology is
pleased to announce our new High Pre-load "E" Spring. In
today's test environments, the challenge is greater than ever to penetrate
excessive fluxes and contaminants in Pb-free, OSP and No-clean
processes. These new 8 ounce rated springs were designed to offer a
higher force during the first 2/3rd of actuation resulting in better probe tip
penetration and higher first-pass yields. The force is also more
consistent when the probe travel is affected by variations due to board flux,
fixture tolerances and target heights.
Pricing for these
new probes will be a $.30 adder to the standard PRP-S (steel) price and
delivery will be 2-3 days ARO.
Please
visit www.qatech.com for
all specifications and dimensions.
06/01/06
QA Technology is
pleased to offer a new JT2830 wire jack tool. This new tool was
designed to aid in attaching the
Wire Jack wire
assembly onto a conventional 039-16 Socket or onto an X39-25, X50-25 and
X50-40 Termination Pin.
Please visit www.qatech.com
for all specifications
and dimensions.
04/17/06
QA
Technology is pleased to offer a 4-point steel headless
crown (14-S) now available in our 050-T25, 050-R25 and X39-25 Series. This point
style is typically used for No-Clean Flux and Pb-Free applications for contact
on pads, leads or posts.
Please visit www.qatech.com
for all specifications
and dimensions.
03/31/06
New X39-TJ-4G
Termination Pin. This
new termination pin provides an additional overall length allowing more options
in our
X39 Series making your wiring process easier.
Please visit www.qatech.com
for all specifications
and dimensions.
Pricing will be the same as all X39-TJ. For samples, please
contact QA Technology. Website: www.qatech.com
03/20/06
New Ultra
High Spring Forces available in our .400 [10.16] Stroke Probes
QA
Technology is pleased to introduce a new Ultra spring force available in our
100-40,
075-40, X75-40 and X50-40 Series.
This new spring force was designed
to
provide higher spring forces at a reduced maximum stroke of .350 [8.89].
For
more detail please contact www.qatech.com
02/28/06
New Headed Point
Styles in our X Probe Socketless Series
X Probe Socketless Series. These point style choices allow you
to select the best possible probe for your intended target. Please note, they
are recommended to be mounted on larger minimum centers.
X75-PRP25:
19,
29, 32, 56, 89 and 99
X75-PRP40:
19
X50-PRP25:
01,
03, 03-S, 05, 06, 07, 08, 08-S, 09, 09-S, 10, 17-S, 18, 18-S, 22, 24, 24-S, 32,
34, 34-S, 51-S, 55,
55-S, 58 and 99
X50-PRP40:
03,
06, 08, 09, 24 and 34
X39-PRP25:
03,
03-S, 09, 09-S, 10, 13-S, 51-S and 58
Please visit our website
www.qatech.com
for
all specifications and dimensions.
06/08/05
QA Technology
X Probe Termination
Installation Notes
We have updated our
applications note Instructions for Installing and Replacing X Series
Terminations and Probes to further explain the proper installation
of our TC termination pins (crimp with pre-attached wire.)
Please find attached the
latest revision (Page 3, Paragraph
1 in bold)
X Probe Installation & Removal Apps Note - D10054 - Rev F(1).pdf
04/28/05
QA Technology is
pleased to now offer X Probe Extraction
Tool Kits.
Goldmine\MailBox\Attach\ETX-KIT(1).pdff:
X Probe Installation & Removal Apps Note - D10054 - Rev E(1).pdf
<%]
uW8o˻:$.8 Y!(ڴ%/ tʞs/6i)HR ezBaf
U@!3 \rM8h'
Ngc p~p A'\@f$W격^Af3L*(^sa.<^)p;e@ďF;v7;z &MUba4ju%ς-7+~DEjmJ&0? T?-h{hBڮ_aI/ɬEh -S4=$T%0mA,aa${!#ء z\%L [qPa"8-="YU0M۪bWӱz BO^Bah["q] {/Waf ב[=_D`p*|X lT!4sv*(]W˖3u
0_(i;vl{(P65بoACYBS6 !3|>*$r0 S2Q{ԺGm\ɶ-L/mdkFzl< 4 ߮\{a2Ѕf*)QY C JsťE>dg.mp Cʆ3]cRbN]ـ{@A'
#=Λr ]ZBD=Nz5jpSP"} +&XP7P;(}NV8|.[ja!T(Ѹ*GO&LEL bCMfg
DH`Vk<ʬyjsGvvsI{0aon7ߺK2k"U,%i CCA.kv0c97^ ˪#o+
JM(̦yB˫V5o)W-49y{$U}}ЮV7ڂD
XNFM^,f2LҌc3Tj[kPyf 9U 2L> Z=Tl`XgvTжЩx
; D7nmqi'uƥR1YqwTKS)3UbNRVR !JVA7
8U8yf#
endstream
endobj
27 0 obj
5274
endobj
25 0 obj
<<
/Type /Page
/Parent 5 0 R
/Resources <<
/Font <<
/F0 6 0 R
/F1 8 0 R
/F2 12 0 R
/F4 16 0 R
/F7 22 0 R
>>
/ProcSet 2 0 R
>>
/Contents 26 0 R
>>
endobj
29 0 obj
<<
/Length 30 0 R
/Filter /FlateDecode
>>
stream
HWr<%Tc]KenlTjD&$ef0 ymfS1˜>=Eie-XcߋgUUJVeΈm֙2b2eX6¥,/kW&e.$ ? ?d-yx Cf# 1-;*1C1rDcCgn`"970dd63ի뭇eC[5ЕO_5z1Ϻ!{&x)a~q(JXqXbϻ+JaY^С{{}
r`lЧ4wTp kN=]V*Ѷ;<3 gVc9b{0}$ܟ=@%Fmh~a q 8y#!/)K2AI).җT,4;j ELڗ{Yq!uX^ _U-K>f*IJb)-A mdE4Sh"p!P w}&X1 X Mh'\YZXcU(Ί;Yd ROڄbĴb j\rOpN2]Gl:JMO.5%W(C3l\fo ZAdB,^>U.8b+C(f;' J 7"
vzݾ؈CWo6unwOٶꍸxx87mdLJ( " Ex݊*nvwS=d=w9:nΞ2ܔTs-/)g3mdU)shF\n[+ cQt GS
>t7͑.1Du7/ f#nf.7߉J9/;GsAJ[/R! WD_^FTؕEJZ͚*[[sxfJ\%hC!!XK Th<)sSK W/ȑ0
Ðփf2uq}YxIH&7۷Ms+ nz H&P3cG nKƃݯwM_OI8OyS|5#tqEN"" Eb\ @SH#bѭC#qP כhvG(nUwc] ݈S?R 2YYsf*`VjB`s HzosQC
&Oj7^u1~vje~ʙ_,ka6YT!##^b_aa~̎n%ja|;50tK͌ aPېU(Xr 9!1 RiwXW:hZM5t>TLSWl-~]o<2S2/Y5 K4xA45)2-_j/W?b8 o7!&S1t nOHg,`\@ UZ) 6}E
bik{o\,^}#.?,/~b0UFJW(Ge*{K Zr
lژ`sv՞F`-kT S6 #O ˈTam{'kK!{e@/ݾy+xIUNBGz<`[qJ ' iU CUaEab [g m 쳻jqy<h:(=9K=Peh<*' Wt /sL~U$~PWy\Y%>u+>u`[ Qd&mif]n݊wcsuݪ5IknɌȼSwv&i0 [ S Bv_=$HI=aH;KC/*_09]i$))$sQ2!)1Xt`9D/Dֱ3_4(+p ]sw4W)#k.
ZHXϽȡ "}5%cbqV kCO]Z,8A-j%i Dt-N=D٦F. OԚOֹQz\auZ^LĹy߇)ݒ̋ =
DOeGwȜQ{iyw
Øi]ɻLy2}S?z`{*4_)דAx"(|цH/\ҳ)LU9DfD~)cVMa _9 x 2g_o(k, 3
endstream
endobj
30 0 obj
3917
endobj
28 0 obj
<<
/Type /Page
/Parent 5 0 R
/Resources <<
/Font 31 0 R
/ProcSet 2 0 R
>>
/Contents 29 0 R
>>
endobj
31 0 obj
<<
/F0 6 0 R
/F1 8 0 R
/F2 12 0 R
/F4 16 0 R
/F5 18 0 R
/F6 20 0 R
>>
endobj
33 0 obj
<<
/Length 34 0 R
/Filter /FlateDecode
>>
stream
HWrH6<P]Txc{!eYG`bCR$ͬ +[Uy=y24"O2Ά[̓R<Vl dZk#NQV@isYy$UB?
"I${I,D]ؓ)"((f>qTt23QƆ**)iSBv'}ZP 1|VT>DS>erPW`m X,r GUrQؘE\ PD ;g4P/\\yf
2DJ`HF+Jbїdi
4eaٞ 0(Y gp_ BY7C1
}d[X,Et;Ӥ]c(;pVR`#@c-CQ ۶2^yNByKʋc$s hģw %#R h<զ}lj{Q tA.XmQPdʪ)$K"3):^eih&6BEY^)*<"h3I[p'1 k0D9wXۥgIDD.iI,kFYzxeTq:c*s]G])M ?3/
@FX%Yi2"cRp)xq28z+C*ឝ_w J0|~2S"W/هnzQ0T'~cTrN,;!3oʝ ۚN CVtJ G0
i8euIR_@x幩3'2S_
y}[jس}E xqoWBGE0ʭQT%{_ߛq 5Ke.ڄ. 4WnՙN/l2NvV戌b
u༔}o5 +j%vVovɦߛ3gTixK p
J*TjV XqXdr7/ HMJ!ƃ$28d1odl說ozvѴh_P0^/p$`l 5켻m 05>08.' Gn
SH+{G1.<yhtz"!0u=eqDEpdUFvL;6j(Axզ NRʊ2*fi}ջwH|W,T^>tGT>>Q9-S( ]Y :3=#88s wGَf yp)KE p2dryzsdOxyo2)u|< e"J:, \*v*S XL
]C*+PC8#iߪWv@Hc 16uwX[vK~GȕvY@zm+w#d MS>Tv5X3a6ފ3 :Pc\fƱ_(IuHn= ڛnH7#F{`%̃[\iL8Ff5j-2']C(._z =G w&Q
WWB} ^\o^=L11lO!H l.S8! pRv?n26M LůkNj[hthdf\fg vRD`OLtgD;_xD'*][{]V7E/bh19ɌrVq.ҏeRGqŇs
9Ol[`7 A-Kۖo7c;w躟&x m&M4Toz*(f.R0C,w JUswZU, vwڡ@hTs dz2̐] <}/Yhj~tg M{:4`YPLNx r> 9G;!:fbI@P|]40瘄Tq|F^<մl`x) I r|nQCK*/
I~Sϸ4- mSF"A_Wo`¹<)y\,V_l>Nḫ >sq p^ p3PCm fejh Dre>xe'EM+Upm`¨'hv71X"EP
Z;=6,RĽ - 9 A7O19l鶨4P8
EQE#Z# ":X>s. NpJ:ӳ+$6Nn ǑW~>ʌXƐi~p,?#g\tPM=ZRZܖSZv\[[|qKICD~\]˛+"f 1WO9]p:? a۪Ӻ28|ᑱפ=w["uHP 3Gp pKS!DЗe'0X:=SXIiJCH
Q́LC܈P l. sA&7}w0w/" 6 Mq 30ۺi+fϬ=
2|r_ Ը zl- i$4Tt?
-KX
·MP_+v PxPP (з|f 0dIqgњ&|@<8%a` ; ?Oܮڵ,v 6rBEc@yF0zr>OȄ->ѫ
gX%,A2 mXP(0G, bT'8-%
0uO\}
3C
endstream
endobj
34 0 obj
3674
endobj
32 0 obj
<<
/Type /Page
/Parent 5 0 R
/Resources <<
/Font 35 0 R
/ProcSet 2 0 R
>>
/Contents 33 0 R
>>
endobj
35 0 obj
<<
/F0 6 0 R
/F1 8 0 R
/F2 12 0 R
/F3 14 0 R
/F4 16 0 R
/F6 20 0 R
>>
endobj
37 0 obj
<<
/Length 38 0 R
/Filter /FlateDecode
>>
stream
HWnHC A̰$YHA5 BK IԊ5ߺt7 fȮSS\V?k'*Jªe)# t$A.P6BQySٕy,7BԄD,;#d60 *3h/GvUb0BT9$h3ЙH& ƛ LVNf&iu c94b夨ML+'cP'싱f5 Q!|dD'=zkOJ%ֱu1\t\a[[쇵 +ܤ>O*l CQq^B y[?5|ZYÎ){%Qj:Js 1yt0*!(L[-YU\̺7~#ux$ff +8G3NѩNTovKs~!cr^֬Å[Q) & N~.Ngr㟠/ʈ^z''
7ЗE.=x?zQ4Ux]}xAvau$vwuRܴ'Ug 9gޝH u;'jSm}}:q&!3I7X1o3rI괠,Y\?/aPxJW2D<[cwx7mGXCB(ivXuAgl581 vH>{=!/}] wJ_wnWϛ! ^4
]!eY>Cdzê uTx)J'~Řa3 #>
/ProcSet 2 0 R
>>
/Contents 37 0 R
>>
endobj
6 0 obj
<<
/Type /Font
/Subtype /TrueType
/Name /F0
/BaseFont /TimesNewRoman
/FirstChar 32
/LastChar 255
/Widths [ 250 333 408 500 500 833 778 180 333 333 500 564 250 333 250 278
500 500 500 500 500 500 500 500 500 500 278 278 564 564 564 444
921 722 667 667 722 611 556 722 722 333 389 722 611 889 722 722
556 722 667 556 611 722 722 944 722 722 611 333 278 333 469 500
333 444 500 444 500 444 333 500 500 278 278 500 278 778 500 500
500 500 333 389 278 500 500 722 500 500 444 480 200 480 541 778
500 778 333 500 444 1000 500 500 333 1000 556 333 889 778 611 778
778 333 333 444 444 350 500 1000 333 980 389 333 722 778 444 722
250 333 500 500 500 500 200 500 333 760 276 500 564 333 760 500
400 549 300 300 333 576 453 250 333 300 310 500 750 750 750 444
722 722 722 722 722 722 889 667 611 611 611 611 333 333 333 333
722 722 722 722 722 722 722 564 722 722 722 722 722 722 556 500
444 444 444 444 444 444 667 444 444 444 444 444 278 278 278 278
500 500 500 500 500 500 500 549 500 500 500 500 500 500 500 500
]
/Encoding /WinAnsiEncoding
/FontDescriptor 7 0 R
>>
endobj
7 0 obj
<<
/Type /FontDescriptor
/FontName /TimesNewRoman
/Flags 34
/FontBBox [ -250 -216 1200 1000 ]
/MissingWidth 333
/StemV 73
/StemH 73
/ItalicAngle 0
/CapHeight 891
/XHeight 446
/Ascent 891
/Descent -216
/Leading 149
/MaxWidth 1000
/AvgWidth 401
>>
endobj
8 0 obj
<<
/Type /Font
/Subtype /TrueType
/Name /F1
/BaseFont /Symbol
/FirstChar 30
/LastChar 255
/Widths [ 600 600 250 333 713 500 549 833 778 439 333 333 500 549 250 549
250 278 500 500 500 500 500 500 500 500 500 500 278 278 549 549
549 444 549 722 667 722 612 611 763 603 722 333 631 722 686 889
722 722 768 741 556 592 611 690 439 768 645 795 611 333 863 333
658 500 500 631 549 549 494 439 521 411 603 329 603 549 549 576
521 549 549 521 549 603 439 576 713 686 493 686 494 480 200 480
549 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600
600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600
600 600 600 620 247 549 167 713 500 753 753 753 753 1042 987 603
987 603 400 549 411 549 549 713 494 460 549 549 549 549 1000 603
1000 658 823 686 795 987 768 768 823 768 768 713 713 713 713 713
713 713 768 713 790 790 890 823 549 250 713 603 603 1042 987 603
987 603 494 329 790 790 786 713 384 384 384 384 384 384 494 494
494 494 600 329 274 686 686 686 384 384 384 384 384 384 494 494
494 600 ]
/FontDescriptor 9 0 R
>>
endobj
9 0 obj
<<
/Type /FontDescriptor
/FontName /Symbol
/Flags 6
/FontBBox [ -250 -220 1243 1005 ]
/MissingWidth 331
/StemV 109
/StemH 109
/ItalicAngle 0
/CapHeight 1005
/XHeight 503
/Ascent 1005
/Descent -220
/Leading 225
/MaxWidth 1036
/AvgWidth 600
>>
endobj
12 0 obj
<<
/Type /Font
/Subtype /TrueType
/Name /F2
/BaseFont /Arial
/FirstChar 32
/LastChar 255
/Widths [ 278 278 355 556 556 889 667 191 333 333 389 584 278 333 278 278
556 556 556 556 556 556 556 556 556 556 278 278 584 584 584 556
1015 667 667 722 722 667 611 778 722 278 500 667 556 833 722 778
667 778 722 667 611 722 667 944 667 667 611 278 278 278 469 556
333 556 556 500 556 556 278 556 556 222 222 500 222 833 556 556
556 556 333 500 278 556 500 722 500 500 500 334 260 334 584 750
556 750 222 556 333 1000 556 556 333 1000 667 333 1000 750 611 750
750 222 222 333 333 350 556 1000 333 1000 500 333 944 750 500 667
278 333 556 556 556 556 260 556 333 737 370 556 584 333 737 552
400 549 333 333 333 576 537 278 333 333 365 556 834 834 834 611
667 667 667 667 667 667 1000 722 667 667 667 667 278 278 278 278
722 722 778 778 778 778 778 584 778 722 722 722 722 667 667 611
556 556 556 556 556 556 889 500 556 556 556 556 278 278 278 278
556 556 556 556 556 556 556 549 611 556 556 556 556 500 556 500
]
/Encoding /WinAnsiEncoding
/FontDescriptor 13 0 R
>>
endobj
13 0 obj
<<
/Type /FontDescriptor
/FontName /Arial
/Flags 32
/FontBBox [ -250 -212 1195 1000 ]
/MissingWidth 273
/StemV 80
/StemH 80
/ItalicAngle 0
/CapHeight 905
/XHeight 453
/Ascent 905
/Descent -212
/Leading 150
/MaxWidth 996
/AvgWidth 441
>>
endobj
14 0 obj
<<
/Type /Font
/Subtype /TrueType
/Name /F3
/BaseFont /Arial,Italic
/FirstChar 32
/LastChar 255
/Widths [ 278 278 355 556 556 889 667 191 333 333 389 584 278 333 278 278
556 556 556 556 556 556 556 556 556 556 278 278 584 584 584 556
1015 667 667 722 722 667 611 778 722 278 500 667 556 833 722 778
667 778 722 667 611 722 667 944 667 667 611 278 278 278 469 556
333 556 556 500 556 556 278 556 556 222 222 500 222 833 556 556
556 556 333 500 278 556 500 722 500 500 500 334 260 334 584 750
556 750 222 556 333 1000 556 556 333 1000 667 333 1000 750 611 750
750 222 222 333 333 350 556 1000 333 1000 500 333 944 750 500 667
278 333 556 556 556 556 260 556 333 737 370 556 584 333 737 552
400 549 333 333 333 576 537 278 333 333 365 556 834 834 834 611
667 667 667 667 667 667 1000 722 667 667 667 667 278 278 278 278
722 722 778 778 778 778 778 584 778 722 722 722 722 667 667 611
556 556 556 556 556 556 889 500 556 556 556 556 278 278 278 278
556 556 556 556 556 556 556 549 611 556 556 556 556 500 556 500
]
/Encoding /WinAnsiEncoding
/FontDescriptor 15 0 R
>>
endobj
15 0 obj
<<
/Type /FontDescriptor
/FontName /Arial,Italic
/Flags 96
/FontBBox [ -250 -212 1217 1000 ]
/MissingWidth 278
/StemV 80
/StemH 80
/ItalicAngle -11
/CapHeight 905
/XHeight 453
/Ascent 905
/Descent -212
/Leading 150
/MaxWidth 1014
/AvgWidth 441
>>
endobj
16 0 obj
<<
/Type /Font
/Subtype /TrueType
/Name /F4
/BaseFont /TimesNewRoman,Bold
/FirstChar 32
/LastChar 255
/Widths [ 250 333 555 500 500 1000 833 278 333 333 500 570 250 333 250 278
500 500 500 500 500 500 500 500 500 500 333 333 570 570 570 500
930 722 667 722 722 667 611 778 778 389 500 778 667 944 722 778
611 778 722 556 667 722 722 1000 722 722 667 333 278 333 581 500
333 500 556 444 556 444 333 500 556 278 333 556 278 833 556 500
556 556 444 389 333 556 500 722 500 500 444 394 220 394 520 778
500 778 333 500 500 1000 500 500 333 1000 556 333 1000 778 667 778
778 333 333 500 500 350 500 1000 333 1000 389 333 722 778 444 722
250 333 500 500 500 500 220 500 333 747 300 500 570 333 747 500
400 549 300 300 333 576 540 250 333 300 330 500 750 750 750 500
722 722 722 722 722 722 1000 722 667 667 667 667 389 389 389 389
722 722 778 778 778 778 778 570 778 722 722 722 722 722 611 556
500 500 500 500 500 500 722 444 444 444 444 444 278 278 278 278
500 556 500 500 500 500 500 549 500 556 556 556 556 500 556 500
]
/Encoding /WinAnsiEncoding
/FontDescriptor 17 0 R
>>
endobj
17 0 obj
<<
/Type /FontDescriptor
/FontName /TimesNewRoman,Bold
/Flags 16418
/FontBBox [ -250 -216 1201 1000 ]
/MissingWidth 333
/StemV 136
/StemH 136
/ItalicAngle 0
/CapHeight 891
/XHeight 446
/Ascent 891
/Descent -216
/Leading 149
/MaxWidth 1001
/AvgWidth 427
>>
endobj
18 0 obj
<<
/Type /Font
/Subtype /TrueType
/Name /F5
/BaseFont /TimesNewRoman,BoldItalic
/FirstChar 32
/LastChar 255
/Widths [ 250 389 555 500 500 833 778 278 333 333 500 570 250 333 250 278
500 500 500 500 500 500 500 500 500 500 333 333 570 570 570 500
832 667 667 667 722 667 667 722 778 389 500 667 611 889 722 722
611 722 667 556 611 722 667 889 667 611 611 333 278 333 570 500
333 500 500 444 500 444 333 500 556 278 278 500 278 778 556 500
500 500 389 389 278 556 444 667 500 444 389 348 220 348 570 778
500 778 333 500 500 1000 500 500 333 1000 556 333 944 778 611 778
778 333 333 500 500 350 500 1000 333 1000 389 333 722 778 389 611
250 389 500 500 500 500 220 500 333 747 266 500 606 333 747 500
400 549 300 300 333 576 500 250 333 300 300 500 750 750 750 500
667 667 667 667 667 667 944 667 667 667 667 667 389 389 389 389
722 722 722 722 722 722 722 570 722 722 722 722 722 611 611 500
500 500 500 500 500 500 722 444 444 444 444 444 278 278 278 278
500 556 500 500 500 500 500 549 500 556 556 556 556 444 500 444
]
/Encoding /WinAnsiEncoding
/FontDescriptor 19 0 R
>>
endobj
19 0 obj
<<
/Type /FontDescriptor
/FontName /TimesNewRoman,BoldItalic
/Flags 16482
/FontBBox [ -250 -216 1200 1000 ]
/MissingWidth 333
/StemV 131
/StemH 131
/ItalicAngle -11
/CapHeight 891
/XHeight 446
/Ascent 891
/Descent -216
/Leading 149
/MaxWidth 1000
/AvgWidth 412
>>
endobj
20 0 obj
<<
/Type /Font
/Subtype /TrueType
/Name /F6
/BaseFont /TimesNewRoman,Italic
/FirstChar 32
/LastChar 255
/Widths [ 250 333 420 500 500 833 778 214 333 333 500 675 250 333 250 278
500 500 500 500 500 500 500 500 500 500 333 333 675 675 675 500
920 611 611 667 722 611 611 722 722 333 444 667 556 833 667 722
611 722 611 500 556 722 611 833 611 556 556 389 278 389 422 500
333 500 500 444 500 444 278 500 500 278 278 444 278 722 500 500
500 500 389 389 278 500 444 667 444 444 389 400 275 400 541 778
500 778 333 500 556 889 500 500 333 1000 500 333 944 778 556 778
778 333 333 556 556 350 500 889 333 980 389 333 667 778 389 556
250 389 500 500 500 500 275 500 333 760 276 500 675 333 760 500
400 549 300 300 333 576 523 250 333 300 310 500 750 750 750 500
611 611 611 611 611 611 889 667 611 611 611 611 333 333 333 333
722 667 722 722 722 722 722 675 722 722 722 722 722 556 611 500
500 500 500 500 500 500 667 444 444 444 444 444 278 278 278 278
500 500 500 500 500 500 500 549 500 500 500 500 500 444 500 444
]
/Encoding /WinAnsiEncoding
/FontDescriptor 21 0 R
>>
endobj
21 0 obj
<<
/Type /FontDescriptor
/FontName /TimesNewRoman,Italic
/Flags 98
/FontBBox [ -250 -216 1064 1000 ]
/MissingWidth 345
/StemV 73
/StemH 73
/ItalicAngle -11
/CapHeight 891
/XHeight 446
/Ascent 891
/Descent -216
/Leading 149
/MaxWidth 887
/AvgWidth 402
>>
endobj
22 0 obj
<<
/Type /Font
/Subtype /TrueType
/Name /F7
/BaseFont /Arial,Bold
/FirstChar 32
/LastChar 255
/Widths [ 278 333 474 556 556 889 722 238 333 333 389 584 278 333 278 278
556 556 556 556 556 556 556 556 556 556 333 333 584 584 584 611
975 722 722 722 722 667 611 778 722 278 556 722 611 833 722 778
667 778 722 667 611 722 667 944 667 667 611 333 278 333 584 556
333 556 611 556 611 556 333 611 611 278 278 556 278 889 611 611
611 611 389 556 333 611 556 778 556 556 500 389 280 389 584 750
556 750 278 556 500 1000 556 556 333 1000 667 333 1000 750 611 750
750 278 278 500 500 350 556 1000 333 1000 556 333 944 750 500 667
278 333 556 556 556 556 280 556 333 737 370 556 584 333 737 552
400 549 333 333 333 576 556 278 333 333 365 556 834 834 834 611
722 722 722 722 722 722 1000 722 667 667 667 667 278 278 278 278
722 722 778 778 778 778 778 584 778 722 722 722 722 667 667 611
556 556 556 556 556 556 889 556 556 556 556 556 278 278 278 278
611 611 611 611 611 611 611 549 611 611 611 611 611 556 611 556
]
/Encoding /WinAnsiEncoding
/FontDescriptor 23 0 R
>>
endobj
23 0 obj
<<
/Type /FontDescriptor
/FontName /Arial,Bold
/Flags 16416
/FontBBox [ -250 -212 1055 1000 ]
/MissingWidth 293
/StemV 153
/StemH 153
/ItalicAngle 0
/CapHeight 905
/XHeight 453
/Ascent 905
/Descent -212
/Leading 150
/MaxWidth 879
/AvgWidth 479
>>
endobj
2 0 obj
[ /PDF /Text ]
endobj
5 0 obj
<<
/Kids [4 0 R 25 0 R 28 0 R 32 0 R 36 0 R ]
/Count 5
/Type /Pages
/MediaBox [ 0 0 612 792 ]
>>
endobj
1 0 obj
<<
/Creator
/CreationDate (D:20050329140743)
/Title
/Author
/Producer (Acrobat PDFWriter 5.0 for Windows NT)
>>
endobj
3 0 obj
<<
/Pages 5 0 R
/Type /Catalog
>>
endobj
xref
0 39
0000000000 65535 f
0000033447 00000 n
0000033304 00000 n
0000034031 00000 n
0000006159 00000 n
0000033335 00000 n
0000022460 00000 n
0000023549 00000 n
0000023810 00000 n
0000024874 00000 n
0000000019 00000 n
0000006138 00000 n
0000025131 00000 n
0000026218 00000 n
0000026471 00000 n
0000027565 00000 n
0000027828 00000 n
0000028929 00000 n
0000029201 00000 n
0000030304 00000 n
0000030584 00000 n
0000031680 00000 n
0000031950 00000 n
0000033041 00000 n
0000006268 00000 n
0000011749 00000 n
0000006376 00000 n
0000011728 00000 n
0000015932 00000 n
0000011916 00000 n
0000015911 00000 n
0000016042 00000 n
0000019901 00000 n
0000016128 00000 n
0000019880 00000 n
0000020011 00000 n
0000022293 00000 n
0000020097 00000 n
0000022272 00000 n
trailer
<<
/Size 39
/Root 3 0 R
/Info 1 0 R
/ID [<55534d3b4881e9a58a238916226bb636><55534d3b4881e9a58a238916226bb636>]
>>
startxref
34080
%%EOF
%>
12/30/03
QA Technology is pleased to announce the
addition of a new steel point style to our X50-25 and 075-25 series. The #39 point
style is a 9 point serrated tip with an .038 reduced diameter head. This point style
was developed for X-Probe applications requiring a 9 point serrated point style for use on
50 mil centers. Please see the product
release and drawing specifications for more details. Drawing specifications
are: C-X50-PR25-G,
C-075-PR25-2-Q
and C-075-PR25-0-N.
11/06/03 -
Product change notifications and drawings for
the new and improved X75 termination pin. The X75-TWA termination pin is .0035"
smaller than the old X75-TW. The revised "X Probe Drill Hole Sizes"
application note is also attached. NOTE - Please be aware when using the new X75-TWA
termination pin, the .0035" reduction in diameter requires a different drill bit to
insure correct finished hole size (see application note) Before inserting any
termination pins, QA Technology strongly suggests the use of pin gauges for hold size
verification before attempting termination pin or probe installation. If you have
any questions, please contact QA Application Engineer Stacey Marrotta (603-601-0154) or QA
Customer Service at (603-926-0348).
10/23/03 -
QA Technology is proud to announce their new #13
steel chisel and #71 steel blade with .038" reduced diameter heads. Both are
now available in the 075-25 and X50-25
series. Please see the product
release and drawing specs for more details. Drawing specifications are: C-075-PR25-0-M;
C-075-PR25-1-K;
C-075-PR25-3-A
and C-X50-PR25-F.
09/16/03 - QA Technology has changed its specifications for
the "H" Spring in our 100-05
series. The "H" Spring is now rated at 1,000,000 cycles at .042 (1.07 mm)
stroke. Please see the product
release and drawing
specification for more details.
08/11/03 - QA Technology is please to now offer custom wire
lengths and wire colors for our wire crimped sockets and wire jacks. Please see the product
release and drawing specificatios for more details. Drawing specifications
are: C-050-SRB255C-B;
C-050-SR25-F;
C-WJ28C-A;
C-050-SB16-D;
C-050-SBB050C-A;
C-050-SBB16C-A;
C-050ST25-F;
C-050-STB255C-A;
C-WJ2830-F;
C-050SB05-B;
C-WJ30C-A;
C-X39-TC-B
and C-X50-TC-B.
08/07/03 - QA Technology is pleased to introduce the
"13-S" point style in our 050-25 series. Please see the product
release and drawing specifications for more details. Drawing specifications
are: C-050-PR25-1-D
and C-050-PT25-1-C.
07/08/03 - QA Technology is pleased to announce a new &
improved longer stroke interface probe, part of our double
ended sockets. The improved designed Double-Ended sockets have bottom side
probes with a total range of .150 (3.81). This allows a set height variation between .047
(1.19) and .137 (3.48) or a total of .090 (2.29). This design allows a much larger
variation in set height to accommodate the majority of component heights found on loaded
boards. The new socket is a drop in replacement for the older style .100 (2.54)
stroked Double-Ended sockets and will work in all applications where the older style
socket is used. The new improved double ended socket product being a direct
replacement for the old design will be phasd in with shipment immediately. Please
see the product release and drawing specifications for more
details. Drawing specifications are: C-050-SB16-D-E; C-050-ST25-D-E; C-075-SD25-D-E; C-100-SD25-D-E; C-X50-FIXTURE-H;
C-X75-FIXTURE-E and C-XTD-D.
06/03/03 - QA Technology is pleased to offer the
"U" spring 17.1 oz (485 gms) with our 100-40
and X75-40
decreased stroke probes. We have also added a new application
note on decreased stroke probes. Please see the drawing specifications for
more details. Drawing specifications are: C-100PR40-D-C,
C-X75PR40-D-0-D,
C-X75PR40-D-1-D
and C-X75PR40D-2-C.
05/30/03 - QA Technology is pleased to introduce the
"89" point style, a larger insulated probe in our 100-25 series. Please
see the product
release and drawing specifications for more details. Drawing specifications
are: C-100-PR25-0-T,
C-100-PR25-1-J,
C-100-P25-2-K,
C-100-PR25-3-K,
C-100-PR25-4-A
and C-100-PR25-5-Q.
05/30/03 - QA Technology is pleased to introduce a shorter
TJ Wire Jack termination, X50-TJ-3G for our X50-25 and X50-40 series. Please see the
product
release and drawing
specification for more details.
04/28/03 - QA Technology is proud to announce our new
"91" sharp headless steel blade, now available in our 075-25 and X50-25 series.
Please see the product
release and drawing specifications for more details. Drawing
specifications: C-075-PR25-0-L,
C-075-PR25-2-N
and C-X50-PR25-E.
03/12/03 - QA Technology is now marking their 75 mil probes
as follows:
075-PRP25 Banded with Blue Ink and Laser Marked;
075-PRG25 & 075-PRN25 Banded with Red Ink and Laser Marked; 075-PR_2599 &
075-PR_40 Banded with Tube Color Only. Click
here to find a drawing for complete specification of the changes stated.
03/04/03 - New QA Technology Competitor Cross Reference Guide.
03/03/03 - QA Technology has added another termination
option to compliment our X50-25 Socketless Series, the X50-TC-1G-3 and X50-TC-1G-8
pre-attached wire. See the press
release and drawing specifcations for more details. Drawing Specifications:
C-X50-TC-A
and C-X50-FIXTURE-F.
02/20/03 - QA Technology is proud to add another
termination option to compliment our X39-25 Socketless Series, the X36-TC-1G-3.
Please see the press
release and drawing specifications for more details. Drawing Specifications
C-X39-TC-A
and C-X389-FIXTURE-C.
02/19/03 - QA Technology has redesigned our probe
installation tools (PT Tools). We have designed "double-ended" tools, our
new PT100/75 and PT50/39. Please click
here to read the product announcement and details on the tools.
02/10/03 - QA Technology now offers the "L"
Spring with our X75-40 headless point styles. Please see the press
release and drawing specifications for more details. Drawing Specifications
C-X75-PR40-0-D,
C-X75-PR40-1-C
and C-X75-PR40-2-C.
02/10/03 - QA Technology now offers the "U"
Spring in our X75-25 Series Socketless Probes. Please see the press
release and drawing specifications for more details. Drawing Specifications
C-X75-PR25-0-F,
C-X75-PR25-1-C,
C-X75-PR25-2-C,
C-X75-PR25-3-D
and C-X75-PR25-4-C.
01/08/03 - WJ2830
wire jacks have been changed to gold plated brass with a nylon insulator to improve the
electrical performance and retention. Also, the overall length is now .090"
longer, increased from .248" to .338". 039-SDC165J
press ring width has also been increased from .0235" to .0335" to improve
retention.
12/22/02 - QA Technology is proud to introduce Indicator
Probes in our X75-25,
X75-40,
X50-25
and X50-40
Socketless Series and our 050-R25
and 050-T25
product series.
07/24/02 - QA Technology is proud to announce the Y spring,
now available in our 125-25 series probes
06/12/02 - QA Technology's X Probe Socketless
Series
05/24/02 - QA Technology announces a new "91"
sharp, headless steel blade, now available in our 100-25 series
probes.
